Connecting the headset to the PC
- 22 Sep 2021
-
PDF
Connecting the headset to the PC
- Updated on 22 Sep 2021
-
PDF
The Kernel Flow headset must be connected to the provided Kernel Flow PC to be operated.
To connect the Flow headset to the Kernel Flow PC:
- Plug the long USB-C end of the Power/Data Cable into the USB-C connector on the back of the headset.
- Plug the shorter USB-C end of the Power/Data Cable into the Kernel Flow Power Supply.
- Plug the power supply into the same outlet or power strip as the Flow Configuration PC.
- Plug the USB-A end of the Power/Data Cable into a USB port on your PC.
The Flow device is now powered on.Do not plug the Power/Data Cable into the red (Gen 2) USB port.NOTE:Even though a blue light illuminates on the headset, all lasers remain off until they are enabled using the Kernel Flow Desktop Application. - Turn on the Kernel Flow PC and click the first icon in the Taskbar to launch the Kernel Flow Desktop Application.
NOTE:
Your PC has been pre-configured by the Kernel team prior to shipment so it is ready to operate the Flow headset immediately. No login or setup is required to run the Kernel Flow Application.