---
title: "Handling the DevKit"
slug: "handling-the-devkit"
updated: 2024-07-31T19:13:30Z
published: 2024-07-31T19:13:30Z
canonical: "docs.kernel.com/handling-the-devkit"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.kernel.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Handling the DevKit

### Putting the DevKit on and off the Headset Stand

**To remove the DevKit from the Headset Stand:**

- Unbuckle the chin strap from underneath the stand (if applicable).
- Lift the headset off of the stand using 2 hands.
- It is recommended for an operator to assist by holding the Hub and EEG Reference/Bias leads as the participant lifts the cap.

[Video](https://cdn.document360.io/c97072d7-dbc3-41f6-b55e-b62dbde0527b/Images/Documentation/DevKIt%20on%20stand.mp4)

****To put the DevKit back on the Headset Stand:****

- Gently stretch the DevKit over the Headset Stand with the front of the cap over the more rounded side of the stand.
- It is recommended for an operator to hold the Hub and EEG Reference/Bias leads as the participant puts the cap on the stand.
- If applicable, buckle the chinstrap under the Headset Stand and tighten to secure the cap.
- The Hub should rest on a hard surface. It will likely not lie flat due to the tension of the cables.

![](https://cdn.document360.io/c97072d7-dbc3-41f6-b55e-b62dbde0527b/Images/Documentation/image-1722382588148.png)