Handling the DevKit

Putting the DevKit on and off the Headset Stand

To remove the DevKit from the Headset Stand: 

• Unbuckle the chin strap from underneath the stand (if applicable).
• Lift the headset off of the stand using 2 hands. 
• It is recommended for an operator to assist by holding the Hub and EEG Reference/Bias leads as the participant lifts the cap.

To put the DevKit back on the Headset Stand: 

• Gently stretch the DevKit over the Headset Stand with the front of the cap over the more rounded side of the stand.
• It is recommended for an operator to hold the Hub and EEG Reference/Bias leads as the participant puts the cap on the stand.
• If applicable, buckle the chinstrap under the Headset Stand and tighten to secure the cap.  
• The Hub should rest on a hard surface. It will likely not lie flat due to the tension of the cables.